LOW – MAINTENANCE HIGH POWER DENSITY LOW SELF – DISCHARGE
Lead-Acid Extended 1U Battery Packs
FOR ACUMENTRICS’ RUGGED-UPS™
Low Maintenance, No Headaches
With these Acumentrics lead-acid battery modules, there is never any need to check specific gravity or replace or top off water. All that is needed is a charge every six months to preserve battery life.
Non-Spillable Battery
The lead-acid battery module’s sealed construction eliminates electrolyte leakage from the terminals or case, ensuring safe, efficient operation in any orientation.
Low Self-Discharge For Longer Life
At ambient temperatures between 20°C and 25°C, the self-discharge rate of the Acumentrics lead-acid battery module is less than 3% per month. This allows storage for up to six months without significant state-of-charge loss.
Operate in Any Orientation
With their sealed construction and electrolyte suspension, Acumentrics’ lead-acid battery modules can be mounted in any orientation, vertically or horizontally. (However, inversion should be avoided.)
Efficient Gas Recombination
These battery modules incorporate a unique Absorbent Glass Mat technology that effectively recombines over 99% of the gas generated during normal usage.
Hot and Cold Weather Operation
Lead-acid battery modules can be used over a broad range of ambient temperatures, allowing considerable flexibility in system design and location.
High Recovery Capability
The Acumentrics lead-acid battery modules have excellent charge acceptance and recovery capability, even after very deep discharge.
STANDARDS
EMI: MIL-STD-461-F
Environmental: MIL-STD-810-G
ENVIRONMENTAL
Hot-swappable Internal LAB Battery Pack: 192Wh providing 4 minutes run time for 1kW load
Recharge Time: 4 hours to 90%
Operating Temperature: -18°C to 50° C
Storage Temperature: -32° C to 66° C Humidity: 10% to 95%
Altitude: 0 to 15,000 ft operating, 0 to 40,000 ft non-operating
Rain: operates in blown precipitation
DIMENSIONS / WEIGHTS
Chassis Size (H x W x D): 1.72” x 7.5” x 19”
Case: Aluminum
Weight: 14 lbs
Weight includes cable with connectors
OUTPUT SPECIFICATIONS
Output: 24VDC nominal, 100A max
